![]() ![]() The FPD-R can be used in the center port or the outlet port (shown below) if the 20-0112-02 fuel rail kit was purchased. If the OEM configuration fuel rail kit (20-0112-00) was purchased, select the FPD-R Pulse Damper for Center Port (shown below) since the outlet port will be used for the OEM fuel pressure regulator. The optional FPD-R (Fuel Pulse Damper-Range) requires a base static fuel pressure setting of 3 Bar (43.5psi) which matches the OEM Mitsubishi pressure setting. More information on the Radium fuel pressure gauge can be found here. The engine cover must be removed for installation of the gauge in the top port. The gauge then screws into this billet adapter fitting. The AMS EVO X / Ralliart Fuel Pressure Regulator Kit is designed for anyone running an upgraded fuel pump and or fuel injectors. Also included are vacuum hose and fittings to re-route the vacuum reference line from the. The kit installs in the same location as the OEM fuel pressure regulator. Interchangeable orifices allow the user to tune the regulator for any fuel pump flow. A billet adapter fitting is included for the top port. The Radium Fuel Pressure Regulator offers adjustment from 20psi-up with a 1:1 vacuum reference. If a Radium mechanical gauge is required, select the 20-0075 Gauge/Adapter option above. 1x 14-0150 8AN ORB Plug is included for the centre port. 1x Radium 14-0125 FPR Adapter is included for the 3/8" NPT outlet port permitting the reuse of the OEM pressure regulator. 1x 14-0151 8AN ORB to 6AN Male Fitting to adapt the -6AN hose to fuel rail inlet port. 1x Pre-fabricated ethanol compliant 23" long -6AN PTFE hose with 90 degree swivel ends is included to replace the OEM fuel line. 1x 14-0144 5/16" SAE to -6AN Male fitting to adapt the incoming fuel line to -6AN male near the firewall. 1x Radium Engineering Evolution X fuel rail with mounting hardware. This kit is a direct drop-in replacement for the OEM fuel rail. This option includes everything shown in the picture below. 20-0386 Fuel Pressure Gauge with 8AN ORB Adapter, 90deg - (78.95) IN STOCK : 20-0407 Fuel Pressure Gauge with 90deg Adapter - (64.95) IN STOCK : Select Adapter: Gauge not Included: 14-0332 1/8NPT Male to Female, 90Deg - (14.95) IN STOCK. This correction can be measured throughout the RPM range and can often help an erratic surging idle.ΔΆ0-0112-00 Fuel Rail Kit, Evolution X, OEM Configuration. The internal diaphragm will absorb oscillation pulses and stabilize fuel pressure. In order to achieve a safe and consistent rail pressure, a pulse damper should be used (especially with high flow injectors). The opening and closing of the injectors creates pressure pulses in the fuel rail, which can lead to unstable fuel pressure. The Radium fuel rail is the first and only on the market to support an (optional) fuel pulsation damper. It is compatible with all fuel types including popular alcohol mixtures such as E85. ![]() The rail is CNC machined from solid 6061 aluminium and black dipped anodized for a high quality surface finish. ![]() The EVO X Billet Fuel Rail features a large 0.69" ID bore to suit even the most fuel hungry engines. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |